Ultrasonic Silver Cleaning Kit
This is how you clean silver or silver jewelry with an ultrasonic jewelry cleaner. This Kit consists of the special re-useable Silver Cleaning Plate and 4 Activator Packets. Mix 10:1 ratio with HOT tap water or distilled water in the ultrasonic cleaner and turn the machine "on" for 3 minutes WITH the cleaning plate in the tray. This will help to de-gas the solution. Be sure that the solution amount does not exceed the max line in the tank. Then put your silver jewelry on top of the silver cleaning plate. Turn the machine on for at least 3 minutes. The process of turning the machine on with silver jewelry in it can be repeated several times with very dirty or heavily tarnished silver and silver jewelry. If the water / solution becomes dirty, you must rinse the tank and repeat the process, as dirty solution does not clean properly. Please note that the silver cleaning plate is suitable to be used more than once. You simply will need more of the packets, which can be purchased at any time. WARNING: Soft and porrous stones, or any other gems may not be suitable for an ultrasonic cleaner. Do not store the silver cleaning plate in the solution between uses.
Blitz Stock #20762
- For Use with the Ultrasonic Jewelry Cleaner
- Use with Hot Tap Water or Distilled Water
- For Use with Silver Jewelry
- Non-Toxic
- Made in the USA
